Focusrite RedNet HD32R

56 bodov do vernostného systému

Cena
2 815 € s DPH

Výrobca

Kód produktu
HD32R

ks

32x32 Pro Tools HD I/O pre Dante s redundanciou viac

REDNET HD32R- 32x32 ProTools HD I/O pre Dante

RedNet HD32R je 1U 32x32 Pro Tools HD prevodník pre Dante sieť. Ponúka redundanciu pre sieť a napájanie. Je to ideálne riešenie pre integráciu ProTools HD systému do Dante prostredia v pre Postprodukciu, nahrávacie štúdio, broadcasting, či Live eventy. Mini DigiLink  a LoopSync konektory umožňujú pripojenie k akémukoľvek  ProTools HD systému.


Základné vlastnosti:

  • 32x32 Pro Tools HD I/O pre Dante AoIP
  • Primárny a Expanzný Mini DigiLink konektor
  • 24bit/192 kHz
  • AES67 compliant
  • WordClock a Loop Sync konektory
  • Vzdialené ovládanie pomocou softvéru

DIGITAL PERFORMANCE

  • Supported Sample Rates .... 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 bit
  • Clock Sources .... Internal, Word Clock, Loop Sync (master or slave) or from Dante Network Master
  • External Word Clock Range .... Nominal sample rate ±7.5

REAR PANEL CONNECTIVITY

  • Primary Port .... 1 x Mini DigiLink
  • Expansion Port .... 1 x Mini DigiLink
  • Word Clock Input .... 1 x BNC 75O port (switchable termination)
  • Word Clock Output .... 1 x BNC 75O port
  • PSU .... 2 x IEC Inputs with retaining clips
  • Network .... 2 x etherCON NE8FBH-S, also compatible with standard RJ45 connectors

FRONT PANEL INDICATORS

  • Primary PSU (A) .... Green LED. Illuminates when an AC input is applied and all DC outputs are present
  • Primary PSU (B) .... Green LED. Illuminates when an AC input is applied and all DC outputs are present
  • Primary Network .... Green LED. Indicates that a network connection is present on primary port when in redundant mode
  • Secondary Network .... Green LED. Indicates that a network connection is present on secondary port when in redundant mode
  • Network Locked .... Green LED. When unit is network slave, shows valid network lock. When unit is network master
  • Sample Rate .... Orange LED for each: 44.1 kHz, 48 kHz, x2, x4
  • Pull Up/Down .... Orange LED. Indicates unit is set to operate on a Dante pull up/down domain
  • Signal Indicators .... 16 Green LEDs, 8 input/8 output indicators. Illuminate @ -126dBFS
  • Clock Source .... Orange LED for each: Internal, Word Clock, Loop Sync and DAW Master

NETWORK MODES

  • Redundant .... Allows unit to connect two independent networks
  • Switched .... Connects both ports to integrated network switch allowing daisy-chaining of device

DIMENSIONS

  • Height .... 44.5mm/ 1.75"
  • Width .... 482.6mm/ 19"
  • Depth .... 263mm/ 10.35"

WEIGHT

  • Weight .... 3.9kg

POWER

  • Power PSU .... 2 x Internal, 100-240V, 50/60Hz, consumption 30VA

HEAT PERFORMANCE

  • Operating Temperature .... Operates at up to an ambient temperature of 50 degrees Celcius